ACT is supplying over thousands of pressure sensors each year. They are used to measure pressure of a liquid or gas and provide the information as an electronic signal. We are proud to offer an extensive range in this field with the many customisable options leading to thousands of potential configurations to choose from!
We supply permanent and portable pressure sensors to the water industry, custom solutions for water pressure monitoring, industrial pressure sensors for use in paint spraying and injection moulding, sensors to monitor steam for medical sterilisers and even for sub-sea applications in submersibles and military submarines.
ASDP-21a Differential Pressure Transmitter is assembled by OEM piezoresistive silicon differential pressure sensor, and the housing is the aluminium alloy structure; the pressure connection is M10 thread & agnail structure, and can be directly installed on the measuring piping or connected through the press-leading tube; it is easy to install and use, and widely applies in the air supply for boiler, underground ventilation and other electricity and mining industries,as well as the process control field of automated pressure detection for the super clean workshop.
The Prignitz's DDPT Digital Differential Pressure Transmitter is a microprocessor based digital pressure transmitter for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges.
The digital differential pressure transmitter utilize an extremely stable piezoresistive sensing technology to give a standard full-scale accuracy of 1%. For applications requiring better accuracy, can be offered on request
The Differential Pressure Transmitter also has a 4-20 mA output for applications requiring an output signal. The pressure gauge features a LCD display, which gives the user improved readability and precision.
The DPT used for the measurement of differential pressures in the nonaggressive air and other gases. This transmitter is used in pneumatics, process measurement technology and in building technology. Applications include the monitoring of air ducts, filters or fans. The extended media compatibility of the DPT also allows for the measurement of pressing in slightly aggressive media. The convenient operation allows the switching of measurements and a resetting after installation. This can offset error by the mounting position compensated.
ASPT-11e Pressure Transducer is high performance and low cost products.It is structured by Piezo-resistive OEM ceramic sensor as signal sensing element and the customized amplifiedcircuit,assort with stainless steel housing and durable Aviation or Hirschmann connector.ASPT-11e Transducer is integrally temperature compensated and linearity corrected that can meet the requirement of measure and control under complex environment. Through strict component making, semi-finished product and all-finished product testing and aging, the transmitter is stable and reliable,having excellent consistency, anti-interference, anti-overload and sensitivity.ASPT-11e Transducer provide various output mode and pressure interface, the OEM service can meet extremely clients application requirement.
The ASPT 11i series is an OEM Pressure Transmitter which best fit for Hydraulic as well as Penumatic Applications available from ranges from 1 Bar onwards upto 1000 Bar. We also have compound and absolute pressure transmitters for specific ranges.
Get in touch with us if you are facing quality and delivery issues from international suppliers, we at ACT have a vision to provide pressure measurement solutions locally which is reliable as well as techno-commerically affordable.
The CPS Series submersible liquid level sensors are approved to Class I Div 1, Groups C and D for use in intrinsically safe areas with an approved barrier. It is also certified for ATEX / IECEx/CCOE Class I Zone 0 Exia IIC T4 Ga (Ta = -40 DegreeC to +80 DegreeC). For pressure ranges from 0-1 to 0-100 PSI that requires a wide range of media compatibility, the submersible series is an excellent solution to level monitoring for indoor and outdoor applications. The CPS level sensors are completely sealed for submersion, yet vented through the cable to correct for barometric pressure changes. The welded housing is tested in-house via a helium leak tester to ensure proper protection.
In this configuration, the sensor continuously monitors the tank level through a threaded connection outside the tank, yet remains fully submersible for applications with flood-prone environments or severe wash-down conditions.
Bi-Directional Ranges,Compound Ranges,Absolute Ranges & Standard Gauge Ranges
IP Rating
IP66
Operating temp
-10-70 Deg. C
Preferred Buyer From
Location
Anywhere in India
The medical ventilator plays a key role in the treatment of COVID-19 patients, especially for ones hospitalized in ICU. Although there are many types of ventilators, their principle is generally the same. It helps move air or oxygen into the lungs and takes carbon oxide out, which helps patients' lung function when their bodies are fighting the infection. Inside the medical ventilators, there are types of sensors to monitor pressure, oxygen, flow and humidity, etc. Pressure sensor and transmitters for ventilators are needed for oxygen and air pressure control to ensure the ventilator work safely and smoothly.
ACT Sensors manufactures the pressure sensors and transmitters that may be used in medical ventilator system to help control air or oxygen pressure.
Prignitz Economical series Pressure Transmitter SPT I2 is very economical pressure transmitter available in indian market with 0.25% accuracy.
Prignitz pressure transmitter is very best for OEM application, its very best for air, gas and liquid application. Prignitz pressure transmitter is CE certified product. Prignitz designs different models of pressure transmitter as per customer application, and all model available with competitive price with high German quality technology.
Product Features : Low cost OEM pressure transmitter CE certified product,Pressure transmitter available with test and calibration certificate, Pressure transmitter available with all thread and flange connection as per customer drawing,Many optional output : current and voltage available in Flameproof housing
Process Control, Aviation, Aerospace, Automotive, Medical Equipment, HVAC, etc.
Voltage
10-28 VDC
Accuracy
+/-0.5% FS
Operating Range
Differential Pressure Range upto 2.5 MPa
Output Type
Current: 4-20mA | Voltage: 1-5V/0-5V
Preferred Buyer From
Location
Anywhere in India
ASDP-22W Differential Pressure Transmitter is assembledusing an OEM piezoresistive silicon differential pressuresensor filled with oil. The shell is made of stainless steeland has strong corrosion resistance. The two pressureports are threaded and can be mounted directly on themeasuring pipe or connected through the pressure pipe.ASDP-22W series have standard voltage/current outputoptions, which can be easily installed and used. Theproducts are widely used in the measurement andcontrol of differential pressure, liquid level and flow inprocess control, aviation, aerospace, automotive,medical equipment, HVAC, etc.
